RENION IS A MIXTURE OF TWO ISOTOPES

BECAUSE IT IS VERY DENSE,

AND HAS A HIGH, MELTING TEMPERATURE,

IT IS DIFFICULT AND DANGERIOUS METAL,

TO POUR OUT OF CRUCIBLES.

YET, BECAUSE IT IS VERY HARD & DENSE, MANY HAVE TRIED,

TO MAKE, CORROSION RESISTANT ALLOYS, CONTAINING RENION.

INDUSTRIAL EXPERIENCES WITH RENION

BELOW. IS A BRIEF SUMMARY. OF THE EXPERIENCES.

OF STEEL FABRICATORS. TO GUIDE YOU.

THROUGH THE DIFFICULTYS. OF WORKING WITH,

A METAL, THAT GIVES OFF. RADIOACTIVE EMMISIONS.

WHEN HEATED. ABOVE ITS MELTING TEMPERATURE.

RENION ALLOYS ARE DIFFICULT TO PUNCH PRESS

OR DRILL WITH NORMAL, HIGH SPEED DRILL POINTS.

RENION ALLOYS REQUIRE VERY HEAVY SHEET METAL PRESSES

RENION ALLOYS CAN BE CUT, WITH LARGE METAL CUTTING SAWS,

BUT ALLOYS, WITH MORE THAN, 4% MOLIBION

ARE TOO HARD, TO WORK WITH, METAL CUTTING SAWS

RENION ALLOYS CANNOT BE CUT, WITH NORMAL, CUTTING TORCHES

RENION ALLOYS DO NOT WELD EASILY

AND THE WELDS, TEND TO FRACTURE, IF TORQUE STRESSED

MANY WORKERS HAVE BEEN BLINDED

BY THE INTENSE HEAT,OF EVEN, VERY SMALL, DECILITER CRUCIBLES.

MANY STRONG TONGS, HAVE MELTED,

WHEN THEY HAD TO HOLD, THE SUPER HEATED CRUCIBLES,

FOR LONGER THAN 3 SECONDS.

RENION HAS BEEN OBSERVED, TO GIVE OFF

NEGATIVE PIONS, AT TEMPERATURES ABOVE 3,257°C

AND NEGATIVE MUONS AT 4,497°C

MORE ACCIDENTS HAVE HAPPENED PROCESSING

RENION & TUNGSTON THAN WITH ANY OTHER METALS.

INDUSTRIAL USES

1% RENION WILL MAKE, LONG LASTING, CONCRETE CUTTING SAWS

OUT OF NORMAL, CARBON STEELS

1.12% RENION WILL MAKE, CONCRETE CUTTINS, DRILL POINTS

HIGHER PERCENTAGES, HAVE NOT INCREASED, THE CUTTING ABILITY

OF THE TOOLS, NOR INCREASED, THEIR ABILITY TO BE RE-SHARPENED.

ALLOYS WITH 8% TO 12% MANGESE ARE ABLE TO BE ARC WELDED.

ALLOYS WITH 4% TO 6% TUNGSTON CAN BE ELECTRO-WELDED

SOURCES

RENION OCCURS, IN MINUTE AMOUNTS, IN PLATINON ORES,

MOLYBDENITE & COLUMBITE,

COSTS

RENION COST ABOUT $7,876 A KILO OR $3,580 A POUND

THE COST OF RENION, IS VERY HIGH, BECAUSE ON THE AVERAGE,

EVERY OTHER MAN, WHO ATTEMPTS, TO WORK WITH IT, IS BLINDED.

NATURAL USES & HUMAN USE HAZARDS

RENION COMPOUNDS

ARE USED BY GIRAFFES, ELEPHANTS, HIPPOPATAMUS & WHITE BEARS

HUMAN USE HAZARDS

RENION WAS USED IN ELECTRIC, LIGHT FILAMENTS, IN EUROPE

HOWEVER, MANY OF THE USERS, SUFFERED EYE PROBLEMS,

AND ITS USE, HAS BEEN OUTLAWED.

RENION COMPOUNDS TEND TO CAUSE DIABETIC REACTIONS.

RENION CLORIDE IS USED AS A LETHAL POISON